Architecture Direct

- The hangar was created with metal 'bent and girt' construction.
- The Terminal was a standard wood frame with a cathedral ceiling and high bay windows.
- Wadena MN

- With RCM
- M&E Engineering: Emanuelson Podas

- Metal insulated building with heated floor.
- Wadena MN

- With RCM
- M&E Engineering: Emanuelson Podas

- Using under-floor hot water heat we were able to keep a consistent temperature, making it possible to heat with off-peak electric with the following results:
1. Comfort, especially when the hangar door is open for a short time.
2. HVAC requirements were very low.

- With RCM
- M&E Engineering: Emanuelson Podas

- This building was built to house a national insurance company.
- Operable wood windows were used.
- Gaughen Lathrop Building
- Camp Hill PA

- Plan is 92% efficient.
- 70 foot clear spans.
- Note: The Building Code now requires wider stairways.
- Gaughen Lathrop Building
- Camp Hill PA

- The use of trees surrounding the building was for summer shade and aesthetics.
- Gaughen Lathrop Building
- Camp Hill PA

- This was a proposal to face a new automated warehouse with passive solar panels.
- All energy absorbed would reduce the gas input to ovens. The anticipated energy reduction was considerable.
- Prairie DuChein WI
- As Sr. Architect at 3M

- This industrial transportation system was designed to inspire industry to be built near the Detroit River.
- Several aspects of this design were used including the concept of relocating factories, then tearing them down to create parks.
- The 'People Mover' was an outgrowth of this study.

- With Charles Blessing, Director Detroit City Plan Commission

- This document was prepared to show the way passive solar can be used with different building types.
- Contract with the US Department of Energy and and the PA Department of Energy
- Harrisburg PA